Hey folks, your old pal 12-Gauge Chimp here with some updates.
You all are probably wondering where I've been these last couple weeks. Well, I have had a lot of things come up and haven't really had time to update the site like I would like to. That being said, I have a couple updates for you all and here they are.
1. I am in the process of ordering an actual Nepalese kukri. Hopefully I will get the knife within the next few months and I will post a review and what I think of it as soon as I can.
2. No new guns just yet. I know you are all wondering when I will be doing another gun review and I am eagerly awaiting adding an AK and a CZ-82 to my collection. I know I mentioned buying another Mosin Nagant rifle awhile back, but instead changed my mind. I have now buckled down and decided to buy the CZ and AK when I am able to and this will be the last time I mention buying a new gun or guns for the time being. No more changing my mind.
3. I will try to post some more knife reviews as soon as I can. I just haven't bought any new knives in a few weeks. Actually I did, but they were just some cheap knockoffs of the Kershaw Leek assisted opening knife, nothing really review worthy about them.
4. My site is on the first page of search results for " Mossberg Bullpup review " on Google. That is pretty cool.
Ok, that's pretty much it for updates for this month. I hope you folks will continue to visit my blog and remember, if you like something on my site feel free to comment on an entry or if you really like the site, become a Friend of the Chimp.
As always, this is 12-Gauge Chimp signing off.
An average guy's take on the wonderful world of firearms and knives.
Monday, February 22, 2010
Sunday, January 24, 2010
Range Report # 3: Mossberg 500 Bullpup and Mosin M91/30
Hey folks, it's your old pal 12-Gauge Chimp bringing you a new range report.
I finally got a chance to go to the range near my place today. I shot two firearms from my collection today, my prized Mossberg 500 Bullpup and my 1932 vintage Mosin Nagant M91/30.
I recently purchased some Silver Bear 7.62x54R cartridges for my Mosin M91/30 and I was a bit curious as to how they would work in my rifle. As you all may remember, my Mosin HATES lacquer coated ammo with a passion and I was unsure how it would take to the zinc plating on the new ammo. I chambered one round and did a quick glance around the range for something to smack the bolt with just in case. Turns out I didn't need anything because the bolt was easily operated and I was able to keep the rifle shouldered and chamber a fresh round. I will be ordering this ammo in bulk as soon as I am able to, it is that good.
When I depleted my single box of Silver Bear ammo, I turned my attention to my Mossberg.
I had bought a box of 12 gauge slugs awhile back and I wanted to see if my shotgun was able to shoot them well. Well, they work and oh my are they powerful. I shot at an old microwave and the result was a rather large hole. I fired one slug and was subconciously expecting rather stout recoil, but to my surprise the recoil was about the same as firing a round of my standard 12 gauge load of Federal number 8 shot shells. I went through the single box I had brought along for testing purposes and then loaded my Mossberg with the aforementioned Federal shells. I had brought along a box of Remington brand buckshot shells, but I didn't get around to testing those. Maybe next time. One thing I did notice after firing the Remington slugs, the bolt release on my shotgun seemed to stick after firing a shell, but that could be due to the fact that I probably didn't have the grip safety pushed in completely. However, I will not be firing any more slugs through my shotgun, from now on I will only fire standard shells and buckshot loads in it. The slugs will be saved for the next shotgun I buy, which will probably be a Mossberg 590 or some other type of Mossberg.
Anyway, both the Remington 12 gauge shotgun slugs and the Silver Bear 7.62x54R rifle cartridges get the 12-Gauge Chimp seal of approval.
Overall, I had a fun day at the range and now know which brand of ammo my Mosin likes. I'm still going to try and find a brand of lacquer coated 7.62x54R ammo that my Mosin will digest the same way it does with the Silver Bear ammo.
As always, this is 12-Gauge Chimp signing off.
I finally got a chance to go to the range near my place today. I shot two firearms from my collection today, my prized Mossberg 500 Bullpup and my 1932 vintage Mosin Nagant M91/30.
I recently purchased some Silver Bear 7.62x54R cartridges for my Mosin M91/30 and I was a bit curious as to how they would work in my rifle. As you all may remember, my Mosin HATES lacquer coated ammo with a passion and I was unsure how it would take to the zinc plating on the new ammo. I chambered one round and did a quick glance around the range for something to smack the bolt with just in case. Turns out I didn't need anything because the bolt was easily operated and I was able to keep the rifle shouldered and chamber a fresh round. I will be ordering this ammo in bulk as soon as I am able to, it is that good.
When I depleted my single box of Silver Bear ammo, I turned my attention to my Mossberg.
I had bought a box of 12 gauge slugs awhile back and I wanted to see if my shotgun was able to shoot them well. Well, they work and oh my are they powerful. I shot at an old microwave and the result was a rather large hole. I fired one slug and was subconciously expecting rather stout recoil, but to my surprise the recoil was about the same as firing a round of my standard 12 gauge load of Federal number 8 shot shells. I went through the single box I had brought along for testing purposes and then loaded my Mossberg with the aforementioned Federal shells. I had brought along a box of Remington brand buckshot shells, but I didn't get around to testing those. Maybe next time. One thing I did notice after firing the Remington slugs, the bolt release on my shotgun seemed to stick after firing a shell, but that could be due to the fact that I probably didn't have the grip safety pushed in completely. However, I will not be firing any more slugs through my shotgun, from now on I will only fire standard shells and buckshot loads in it. The slugs will be saved for the next shotgun I buy, which will probably be a Mossberg 590 or some other type of Mossberg.
Anyway, both the Remington 12 gauge shotgun slugs and the Silver Bear 7.62x54R rifle cartridges get the 12-Gauge Chimp seal of approval.
Overall, I had a fun day at the range and now know which brand of ammo my Mosin likes. I'm still going to try and find a brand of lacquer coated 7.62x54R ammo that my Mosin will digest the same way it does with the Silver Bear ammo.
As always, this is 12-Gauge Chimp signing off.
Saturday, January 16, 2010
Guns and Gear Review #6: Maxam/M-Tech Kukri
Hello folks, it's your old pal 12 Gauge Chimp here, bringing you another knife review.
Today, I'll be reviewing the Maxam/M-Tech Kukri.
Factory Specifications for : Maxam/M-Tech Kukri
Blade type: Kukri, rat tail tang, fixed blade
Blade material: 440 stainless steel
Blade length: 10"
Overall length: 14.5"
I purchased this knife at a local VFW flea market for the price of around 15 dollars US. It came with the usual nylon sheath that many low price knives have. The finish is nice being a sort of anti-rust coating. The handle is a hard rubber with a lanyard hole molded in. Overall, it's a nice looking knife.
After a little bit of research on my part, I found out the blade was made of 440 stainless steel, which in it's own way is a good type of steel. However, for a knife that will see heavy use like the kukri, 440 stainless steel is all but useless. The sheath that came with the kukri was advertised as being " Ballistic Nylon " which, in reality, it turned out to be plain nylon webbing. The exact same kind you'd get with numerous low quality knives. It holds the knife in, but that's about all it does. A snap is supposed to keep the knife secure, but I found out that even with the snap fastened, I can still draw the knife out. That's not good.
The handle was a bit loose, but after drilling a couple holes into it and filling it with an epoxy mix, that problem was solved. It still rattles a bit, but not as much as it did before.
After residing at the bottom of my knife drawer, I decided to test the kukri's cutting ability. That and I wanted to see if I could hack open a coconut with it, which it actually does a pretty decent job of by the way. I did kind of ding the blade after my first couple of attempts at hacking the coconut, but once I got into the swing of things, that coconut was split into two pieces.
Overall, I'm happy with the knife. It's not a bad knife, but it's not one of the best out there. I will continue to look for a kukri and the Maxam/M-Tech Kukri will be used only for the occasional coconut hacking.
I'm going to rate this knife a 3 out of 5. Not bad, but could be better.
As always, this is 12-Gauge Chimp signing off.
Today, I'll be reviewing the Maxam/M-Tech Kukri.
Factory Specifications for : Maxam/M-Tech Kukri
Blade type: Kukri, rat tail tang, fixed blade
Blade material: 440 stainless steel
Blade length: 10"
Overall length: 14.5"
I purchased this knife at a local VFW flea market for the price of around 15 dollars US. It came with the usual nylon sheath that many low price knives have. The finish is nice being a sort of anti-rust coating. The handle is a hard rubber with a lanyard hole molded in. Overall, it's a nice looking knife.
After a little bit of research on my part, I found out the blade was made of 440 stainless steel, which in it's own way is a good type of steel. However, for a knife that will see heavy use like the kukri, 440 stainless steel is all but useless. The sheath that came with the kukri was advertised as being " Ballistic Nylon " which, in reality, it turned out to be plain nylon webbing. The exact same kind you'd get with numerous low quality knives. It holds the knife in, but that's about all it does. A snap is supposed to keep the knife secure, but I found out that even with the snap fastened, I can still draw the knife out. That's not good.
The handle was a bit loose, but after drilling a couple holes into it and filling it with an epoxy mix, that problem was solved. It still rattles a bit, but not as much as it did before.
After residing at the bottom of my knife drawer, I decided to test the kukri's cutting ability. That and I wanted to see if I could hack open a coconut with it, which it actually does a pretty decent job of by the way. I did kind of ding the blade after my first couple of attempts at hacking the coconut, but once I got into the swing of things, that coconut was split into two pieces.
Overall, I'm happy with the knife. It's not a bad knife, but it's not one of the best out there. I will continue to look for a kukri and the Maxam/M-Tech Kukri will be used only for the occasional coconut hacking.
I'm going to rate this knife a 3 out of 5. Not bad, but could be better.
As always, this is 12-Gauge Chimp signing off.
Thursday, December 31, 2009
Guns and Gear Review # 5: Smith and Wesson CKSUR-4G fixed blade knife
Hello folks, 12-Gauge Chimp here with the first of many knife reviews.
Today, I'm going to be reviewing the Smith and Wesson " Homeland Security " fixed blade knife.
I'll start by listing the factory specs on the knife and then move on to what I think.
Factory specifications for: S&W CKSUR-4G fixed blade ( CKSUR-4G is the model number )
Blade type: tanto style, full tang
Blade material: 440C stainless steel
Length: 5.5"
Weight: 14.8 ounces
Overall length: 11.75"
Now here's what I think of the knife.
This knife is a beast and what I mean by that is that the knife is very durable, not to mention the weight of it. It would make a very good rough use camp or combat knife, the steel used is 440C stainless, which is a good steel for high quality knife blades. It's a full tang knife and by that I mean the tang of the knife, where the grips usually go, is the same width as the blade. There are various types of knife tang styles, with full tang being the strongest and most wanted.
The grips on it are made of something called G10, which I'm guessing is some type of plastic. The sheath that comes with it is made of ABS plastic and ballistic nylon with a large "D" ring on the end of it. It can be worn on either a belt ( be sure to have a heavy duty belt, due to the weight of the knife ) or on a tactical vest. It even comes with a sharpening stone, which has it's own little pocket on the sheath.
I haven't done a whole lot of cutting tests with it, but I will soon and update this entry with the results. I will, however, say that it is sharp. Not exactly " shaving " sharp, but it is sharp enough to cut you if you aren't careful.
My final thoughts on the Smith and Wesson CKSUR-4G " Homeland Security " knife are this. If you have the chance to buy one, I'd say go ahead. There are knives that are more expensive and can do basically the same thing as this one, but not everyone can afford a $150+ knife and that's where this knife shines. It is affordable and capable of withstanding any abuse that can be inflicted upon it.
I rate this knife as a 5 out of 5
As always, this is 12-Gauge Chimp signing off.
Today, I'm going to be reviewing the Smith and Wesson " Homeland Security " fixed blade knife.
I'll start by listing the factory specs on the knife and then move on to what I think.
Factory specifications for: S&W CKSUR-4G fixed blade ( CKSUR-4G is the model number )
Blade type: tanto style, full tang
Blade material: 440C stainless steel
Length: 5.5"
Weight: 14.8 ounces
Overall length: 11.75"
Now here's what I think of the knife.
This knife is a beast and what I mean by that is that the knife is very durable, not to mention the weight of it. It would make a very good rough use camp or combat knife, the steel used is 440C stainless, which is a good steel for high quality knife blades. It's a full tang knife and by that I mean the tang of the knife, where the grips usually go, is the same width as the blade. There are various types of knife tang styles, with full tang being the strongest and most wanted.
The grips on it are made of something called G10, which I'm guessing is some type of plastic. The sheath that comes with it is made of ABS plastic and ballistic nylon with a large "D" ring on the end of it. It can be worn on either a belt ( be sure to have a heavy duty belt, due to the weight of the knife ) or on a tactical vest. It even comes with a sharpening stone, which has it's own little pocket on the sheath.
I haven't done a whole lot of cutting tests with it, but I will soon and update this entry with the results. I will, however, say that it is sharp. Not exactly " shaving " sharp, but it is sharp enough to cut you if you aren't careful.
My final thoughts on the Smith and Wesson CKSUR-4G " Homeland Security " knife are this. If you have the chance to buy one, I'd say go ahead. There are knives that are more expensive and can do basically the same thing as this one, but not everyone can afford a $150+ knife and that's where this knife shines. It is affordable and capable of withstanding any abuse that can be inflicted upon it.
I rate this knife as a 5 out of 5
As always, this is 12-Gauge Chimp signing off.
Friday, December 11, 2009
Updates for December 2009 : Not a lot happening lately.
Hey folks, your old pal 12-Gauge Chimp here with some updates to the site.
1. I am still in the process of buying the AK-47 and CZ-82 I mentioned in a prior post.
I have decided to buy a Romanian WASR-10, but I haven't decided just which variant I want. The CZ-82 will find it's way into my collection sometime in the next year, because I have to buy some Christmas gifts for members of my family. The AK will follow soon after the CZ-82.
2. I am considering doing some knife reviews. If you guys and gals think I should go ahead and do that, let me know. Keep in mind that I have a very limited budget right now so at first I'll be looking at knives I already own. That doesn't mean I won't take suggestions, feel free to post a comment or two in the comment part of this entry.
3. Please feel free to let me know what you think of the site and if you like the site, become a Friend of the Chimp.
By the way, folks, Happy Holidays and thank you for visiting this website.
As always, this is 12-Gauge Chimp signing off.
1. I am still in the process of buying the AK-47 and CZ-82 I mentioned in a prior post.
I have decided to buy a Romanian WASR-10, but I haven't decided just which variant I want. The CZ-82 will find it's way into my collection sometime in the next year, because I have to buy some Christmas gifts for members of my family. The AK will follow soon after the CZ-82.
2. I am considering doing some knife reviews. If you guys and gals think I should go ahead and do that, let me know. Keep in mind that I have a very limited budget right now so at first I'll be looking at knives I already own. That doesn't mean I won't take suggestions, feel free to post a comment or two in the comment part of this entry.
3. Please feel free to let me know what you think of the site and if you like the site, become a Friend of the Chimp.
By the way, folks, Happy Holidays and thank you for visiting this website.
As always, this is 12-Gauge Chimp signing off.
Thursday, November 19, 2009
Update to Random Thoughts # 8: Yet another Mosin
Hey guys, 12-Gauge Chimp here with a new development in my firearms purchasing quest.
I mentioned a couple days back that I was planning to buy another Mosin rifle, well something better came up and I will be buying a CZ-82 9x18mm Makarov pistol sometime next year. I figured the price of either Mosin rifle was a bit high and I was right. The shop had the rifles for sale at $179 for either the M44 or the M38. That is a bit too high for me and instead I will save up a bit more and buy the CZ-82, a firearm that is actually worth the high price tag.
Now don't get me wrong, I think the Mosin M44 and M38 are very nice rifles, but when I can find a better deal on a firearm, you better believe I'm going to go for it. I will, however, buy another Mosin as soon as I can, but for now the CZ-82 is the firearm I'm focusing on.
That'll do it for this update. As always, this is 12-Gauge Chimp signing off.
I mentioned a couple days back that I was planning to buy another Mosin rifle, well something better came up and I will be buying a CZ-82 9x18mm Makarov pistol sometime next year. I figured the price of either Mosin rifle was a bit high and I was right. The shop had the rifles for sale at $179 for either the M44 or the M38. That is a bit too high for me and instead I will save up a bit more and buy the CZ-82, a firearm that is actually worth the high price tag.
Now don't get me wrong, I think the Mosin M44 and M38 are very nice rifles, but when I can find a better deal on a firearm, you better believe I'm going to go for it. I will, however, buy another Mosin as soon as I can, but for now the CZ-82 is the firearm I'm focusing on.
That'll do it for this update. As always, this is 12-Gauge Chimp signing off.
Saturday, November 14, 2009
Previews of what's to come on 12-Gauge Chimp's Blog
Hey folks, 12-Gauge Chimp here with a list of whats to come on the site.
1. In a few weeks or so, I will be bringing you an update on which Mosin rifle I end up with. It'll either be that M44 or the M38 and I'll do a review and a range report sometime after that. ( See above update )
2. I have an oppurtunity to restore my Mossberg bullpup to factory specifications. I have contacted someone at a collectors organization devoted to Mossberg shotguns and they have a limited supply of parts for my particular gun. So hopefully I can get the parts I need and bring my bullpup back to it's original factory appearence.
3. My search for a genuine kukri continues. I have found a couple sources for kukris in the US and also I have contacted a kukri maker in Nepal, but so far it looks like I'm going with the ones in the US, due to shipping costs. It's something like 38 bucks just for shipping from Nepal to the US. Combine that with the cost of the kukri itself and the total comes out to about 90 bucks.
Anyway, that's going to do it for the previews. As always, this is 12-Gauge Chimp signing off.
1. In a few weeks or so, I will be bringing you an update on which Mosin rifle I end up with. It'll either be that M44 or the M38 and I'll do a review and a range report sometime after that. ( See above update )
2. I have an oppurtunity to restore my Mossberg bullpup to factory specifications. I have contacted someone at a collectors organization devoted to Mossberg shotguns and they have a limited supply of parts for my particular gun. So hopefully I can get the parts I need and bring my bullpup back to it's original factory appearence.
3. My search for a genuine kukri continues. I have found a couple sources for kukris in the US and also I have contacted a kukri maker in Nepal, but so far it looks like I'm going with the ones in the US, due to shipping costs. It's something like 38 bucks just for shipping from Nepal to the US. Combine that with the cost of the kukri itself and the total comes out to about 90 bucks.
Anyway, that's going to do it for the previews. As always, this is 12-Gauge Chimp signing off.
Subscribe to:
Posts (Atom)